Nikko Steel CIN-1

PURE NICKEL ELECTRODE FOR FULLY MACHINABLE, CRACK-RESISTING WELDS ON ALL GRADES OF CAST IRON 

SPECIFICATION :

AWS A5.15

EN ISO 1071

JIS Z 3252

CLASSIFICATION :

ENi-CI

E C Ni-CI 3

DFCNi 

PRODUCT DESCRIPTION :

The design emphasis of the chemically basic flux assures the metallurgical integrity of the weld metal. The high graphite content of the flux is expelled from the molten metal, compensating for the compression welding stresses thus preventing weld metal cracking. The core wire is pure nickel.

WELDING FEATURES OF THE ELECTRODE 

The arc is stable both AC and DC, but is very soft, thus minimising dilution. Weld beads are smooth, bright and evenly rippled. The slag is fairly fluid but relatively quick freezing, thus allowing smooth blends when edges are involved. The slag is readily controlable, thus making positional welding very easy, plus the slag is easily detachable.

APPLICATIONS AND MATERIALS TO BE WELDED

Successful welding of cast irons is dependant on low strength weld metal and controlled heat input welding procedures. Both characteristics are assured by the use of CIN-1. CIN-1 may be used for all standard grades of grey cast iron and malleable cast irons. Typical applications include repairs to engine blocks and heads, gear housings, machine bases, as well as repairs to used castings. Is also used to rectify casting defects on new castings.

WELD METAL ANALYSIS COMPOSITION % BY Wt.

                            C        Mn        Si         S         P        Fe         Ni       Others

MIN                     -          -            -          -          -         -           85            - 

MAX                   2.0      2.5        4.0      0.03      -        8.0         -            1.0 

TYPICAL           1.0      0.01       0.3      0.001   0.01   0.55      Bal.        0.05

WELD METAL PROPERTIES (ALL WELD METAL)

PROPERTY                      UNITS            MINIMUM              TYPICAL            OTHERS

Tensile strength                 N/mm2                                                275 

0.2% Proof stress               N/mm2                                                 - 

Elongation on 4d                  %                           -                            8                 HV140 -160

Reduction of Area (RA)       %                           -                            -     

Impact energy-                       J                           -                            - 

not applicable

WELDING AMPERAGE AC or DC

Ø (mm)         2.6         3.2       4.0 

MIN              50           70      100 

MAX             80         110      140

OTHER DATA

Electrodes that have become damp should be re-dried at 110oC for 1hour.

Kami menyediakan beragam Kawat Las untuk berbagai kebutuhan antara lain untuk penyambungan, pelapisan bagian-bagian mesin untuk membuat lebih awet dan juga untuk menambal mata pisau yang sudah tumpul ataupun melapisi mata pisau sehingga menjadi lebih tahan lama dan beragam aplikasi lain.
Silahkan menghubungi Kami untuk informasi lebih lengkap dan Pemesanan keseluruh wilayah Indonesia.

Melayani partai dan eceran.
Barang kondisi 100 % Baru. 
Dijamin Keasliannya.
Melayani penjualan seluruh indonesia (pengiriman via JNE,TIKI,POS)
Resellers are welcome.

Apabila berminat hub segera:
Mekar Jaya Sentosa
LTC Glodok GF 2 Blok A16 No.2&3
Supplier of Welding Electrodes
Untuk info harga Hubungi Apau 081385839999 (Fast Respon)